Proxmark3 Easy Backup Battery

Description

Proxmark3 V3.0 DEV Easy Backup Package

This item can be fully compatible with Proxmark3 V3.0 DEV Easy Kits.

Description

This backup package can supply external power for Proxmark3, which means that it will help Proxmark3 to run independently as long as five hours without the computer, so you can use Proxmark3 to detect data and save the data in Proxmark3 outdoors. Then try to read and analyze these data through the software when Proxmark3 is connected with your computer.

When the Proxmark3 run as independent mode, it can read ID and HID cards and simulate low frequency cards independently.

Characteristic

1、This backup package can supply external power for Proxmark3, which means that it will help Proxmark3 to run independently as long as five hours without the computer.

2、This backup package can be installed and used directly on Proxmark3, support automatic charging and stop automatically when the battery is fully charged.

3、This backup package adopt adhesive sticker to fix the battery, so the battery can be replaced conveniently.

Parameter

1、Size: 54mm(L) * 86.5mm(W) * 12.4mm(H)

2、Charging Time: 3 Hours

3、Using Time: 5 Hours

4、Red LED (CHR): Charging Process

5、Green LED (FULL): Fully Charged

How to assemble the backup package ?

Step 1: Remove the Original Proxmark PCB Protection Shell
Step 2: Assemble the New Backup Package Protection Shell
Step 3: Take Off Adhesive Tape of Battery, Stick the Battery On the New Protection Shell

Step 4: Assemble the LF Antenna

Comparison Diagram Between Original Version and Battery Version

The battery version is only 2mm thicker than original version.

Click to download the manual、firmware and software

Package Item List:

New Backup Package Protection Shell  x1

Proxmark3 Rechargeable Battery  x1

Copper Pillar  x4